Free shipping on orders over $199

snappad-bg
previous arrow
next arrow

RV ACCESSORIES

View more

OUTDOOR GEAR

Shop Now

MAINTENANCE & REPAIR

View more

LATEST PRODUCTS

  • About item:

    Nitrous Express has spent countless hours on the flow bench, eliminating these turbulence points in its systems to minimize the boiling of the nitrous charge.  NX has designed its own bottle valve, which differs in many ways from the standard or even custom valves offered by the other companies.  The flow path of the NX “Lightning” bottle valve has only one turn, a 45-degree angle to the discharge point.  This eliminates the harsh 90-degree turn present in most bottle valves.  One company that boasts of its “Super High Flow Valve” has designed one 45-degree turn and one 127-degree turn inside the body of the valve.  This severely restricts the flow and causes a turbulence point that sends a diluted flow of nitrous downstream to the nitrous solenoid.  Finally, the style of bottle nipple used by NX allows the nitrous to transition from the valve to the supply hose with no internal steps or restrictions.  These things may seem small or insignificant to the layperson, but on the dyno, NX systems make more horsepower per pound of nitrous than anyone.

    Nitrous Express Lightning 500 bottle valves feature a .500″ orifice and a direct flow path that eliminates those power-robbing gaseous bubbles. The result is more horsepower! The Lightning 500 will outflow any competitor’s valve on the market today and is recommended for all nitrous systems up to 2000 nitrous horsepower.  The 500 has a .625″ siphon tube, only one 45-degree turn in the nitrous flow path, and fittings that will allow the use of up to a 10AN supply line with no restrictions. The 500 is engineered to eliminate all obstructions, sharp edges, or tight turns that will disrupt the smooth laminar flow of nitrous. This design minimizes boiling and gaseous nitrous in the flow path to the solenoid resulting in a nitrous system that produces more clean horsepower and is easier to tune on any car! The Lightning 500 is CNC machined from billet aluminum and is approximately ½ pound lighter than a comparable brass valve, it has dual gauge ports and interchangeable nipples that will allow the use of 4AN, 6AN, 8AN, or 10AN supply lines.

      • Valves include a 4AN nipple. Other bottle nipple sizes need to be purchased separately.
      • Includes siphon tube for 10lb NX Nitrous Bottle
  • Color: Black
    Material: HDPE
    Brand: SeaSucker
    Item Weight: 5 Pounds

    • Sets up in under 5 minutes thanks to pre-attached poles
    • Nearly vertical walls offer 20% more headroom than traditional Coleman dome tents
    • WeatherTec system’s welded corners and inverted seams help keep water from getting in
    • Strong frame has been tested to withstand up to 35 mph winds
    • Wider door makes it easier to move air beds, sleeping bags, and other gear in and out of the tent
  • Color Black
    Material Plastic, Steel
    Brand Malone
    Item Dimensions LxWxH 19.5 x 8.5 x 3.5 inches
    Item Weight 14.5 Pounds

    About this item

    • Quick release fold-down frames for low clearance – Universal mounting adapters fit most load bar designs
    • MultiRack extension modules to carry SUPs & canoes
    • SUP insert pads to cushion and provide hull protection during transport
    • Two lengths of mounting bolts for improved bar fit – Includes 11′ load straps and tie-downs for two boats
    • Lifetime Limited
    • Sport Type: Camping & Hiking

RV Products

  • Our Mini pads are some of our smallest SnapPads available. SnapPad Mini 6 works with 6” round jacks found on a variety of travel trailers, truck campers, and some Class B & C Motorhomes.

  • The biggest SnapPad package we offer, the SnapPad EQ Grand Lux package comes with four permanent jack pads for 10” Octagon jacks and two for the front 12” round feet. This setup is typically found on some of the biggest Fifth Wheels on the market. Snap on a set of EQ Grand Lux and take your luxury Fifth Wheel to another level.

    • Ductile iron/Steel
    • Made in USA
    • Stronger, yet lighter than cable; So lightweight it floats; Totally flexible; Easy on your hands; it has no wire wickers; Greaseless; Impervious to rust or kinking; Resistant to permanent smashing; Whiplash-free (does not store energy, cannot whiplash if broken); Lightweight – it reduces the overall weight of Puller;
    • Solid cast components include: FRAME – Ductile iron, Ribbed for added strength. REEL (DRUM) – Welded steel, Double sided teeth for safety. PAWLS (DOGS) – Ductile iron, Double sided for safety, Spring loaded interlocking pawl system. YOKE – Ductile iron, Ribbed for addded strenth. HOOKS – Frame hook & end hook are forged steel, Tackle block hook is a steel investment casting. AMSTEEL BLUE SYNTHETIC ROPE – 5/16″, 12-strand, single braid rope; 100% Dyneema SK-75 fiber with Samthane coating
    • INCLUDES: Main unit with synthetic rope; 3 hooks (Frame hook, end hook, and tackle block hook); Safety latches on all 3 hooks; Safety handle (18″); Two-in-one-unit – Removable tackle block hook allows easy switching from double line to single line capacity. OPTIONAL: Extension handle (18″ -inserts in standard safety handle)
    • DIMENSIONS: 17″ length x 6″ width x 8″ height. WARRANTY All models include a two-year limited warranty. SAFETY: safety handle will bend when the rated capacity of puller is exceeded; Dual-sided reel and pawl system; 5/16″ cable size; Solid one-piece iron components made in USA; Trouble free on one notch at a time let down – up to 4 notches on a light load; Tried and true, tested design since 1934
    • Rope mfg. by Samson Rope; ROPE LENGTH (single line): 35 feet; CAPACITY – Dead Lift Rating (double line): 3 ton (6,000 lbs.); CAPACITY – Pull/Drag Rating (double line) 6 ton (12,000 lbs); ROPE SIZE: 5/16″; WEIGHT LBS: 24.2; MODEL NUMBER: 3-35-A-SLT

BRANDS WE STOCK