Free shipping on orders over $199

snappad-bg
snappad-bg
MICRO AIR banner
previous arrow
next arrow

RV ACCESSORIES

View more

OUTDOOR GEAR

Shop Now

MAINTENANCE & REPAIR

View more

LATEST PRODUCTS

    • PROPRIETARY TONGUE WEIGHT SCALE: Our built in scale makes balancing your trailer efficient and hassle free by automatically providing a measurement every time you couple your trailer, so you will automatically know your load needs to be adjusted providing unsurpassed safety
    • HEAVY-DUTY TOWING CAPACITY: Made of 18 lbs. of solid aircraft grade aluminum this hitch is as tough as they come, with a towing capacity (GTW) of 10,000 lbs. on the 2 5/16″ ball and 10,000 LBS on the 2″ ball, and a 1,500 lbs. max tongue capacity
  • About item:

    Nitrous Express has spent countless hours on the flow bench, eliminating these turbulence points in its systems to minimize the boiling of the nitrous charge.  NX has designed its own bottle valve, which differs in many ways from the standard or even custom valves offered by the other companies.  The flow path of the NX “Lightning” bottle valve has only one turn, a 45-degree angle to the discharge point.  This eliminates the harsh 90-degree turn present in most bottle valves.  One company that boasts of its “Super High Flow Valve” has designed one 45-degree turn and one 127-degree turn inside the body of the valve.  This severely restricts the flow and causes a turbulence point that sends a diluted flow of nitrous downstream to the nitrous solenoid.  Finally, the style of bottle nipple used by NX allows the nitrous to transition from the valve to the supply hose with no internal steps or restrictions.  These things may seem small or insignificant to the layperson, but on the dyno, NX systems make more horsepower per pound of nitrous than anyone.

    Nitrous Express Lightning 500 bottle valves feature a .500″ orifice and a direct flow path that eliminates those power-robbing gaseous bubbles. The result is more horsepower! The Lightning 500 will outflow any competitor’s valve on the market today and is recommended for all nitrous systems up to 2000 nitrous horsepower.  The 500 has a .625″ siphon tube, only one 45-degree turn in the nitrous flow path, and fittings that will allow the use of up to a 10AN supply line with no restrictions. The 500 is engineered to eliminate all obstructions, sharp edges, or tight turns that will disrupt the smooth laminar flow of nitrous. This design minimizes boiling and gaseous nitrous in the flow path to the solenoid resulting in a nitrous system that produces more clean horsepower and is easier to tune on any car! The Lightning 500 is CNC machined from billet aluminum and is approximately ½ pound lighter than a comparable brass valve, it has dual gauge ports and interchangeable nipples that will allow the use of 4AN, 6AN, 8AN, or 10AN supply lines.

      • Valves include a 4AN nipple. Other bottle nipple sizes need to be purchased separately.
      • Includes siphon tube for 10lb NX Nitrous Bottle
  • About item:

    • The Maximizer 6 features many safety features that help you push your tune-up further while protecting your engine from damage.

      The Maximizer 6 progressive nitrous controller operates up to four separate stages of nitrous based on either time, RPM, MPH, throttle percentage or boost pressure. Whether your engine is naturally aspirated or forced induction, gasoline or diesel, the Maximizer 6 is the first choice.

      Safety Features

      The Max 6 monitors throttle percentage, engine rpms, nitrous PSI, boost or pan vacuum as well as 3 other user defined sensors to ensure that your engine is in the correct state to accept nitrous. If the Max 6 detects any condition that is outside the safe range, the Max 6 will shut down or pull back nitrous flow to protect your engine from any damage.

    • POWERFUL: 1500W continuous, 4000W surge for 20 seconds, 12.5 amps, 120VAC pure sine clean power, low frequency, auto transfer switch and 50A smart battery charger for 8 different battery technologies including lithium.
    • PROTECTIONS: Overload, over temp, high voltage, low voltage, short circuit, internally fused, low and high voltage alarm, cooling fan, and isolated ground neutral.
    • FEATURES: GFCI Outlet, charge current control dial, dip switches to set priorities, auto gen start, conformal coated, power save mode and battery temp sensor. Only one set of cables needed. Optional remotes available.
    • APPLICATIONS: Ideal for applications going back and forth from shore/generator and inverter power automatically, offgrid and back-up power. Homes, boats, RVs, solar, mobile business & work trucks. 12 Volt more efficient and can use smaller cables.
    • TRUST AIMS: Buy with confidence. In business for over 20 years. All tech and warranty support in Nevada.

RV Products

  • Our Mini pads are some of our smallest SnapPads available. SnapPad Mini 6 works with 6” round jacks found on a variety of travel trailers, truck campers, and some Class B & C Motorhomes.

  • The biggest SnapPad package we offer, the SnapPad EQ Grand Lux package comes with four permanent jack pads for 10” Octagon jacks and two for the front 12” round feet. This setup is typically found on some of the biggest Fifth Wheels on the market. Snap on a set of EQ Grand Lux and take your luxury Fifth Wheel to another level.

    • Ductile iron/Steel
    • Made in USA
    • Stronger, yet lighter than cable; So lightweight it floats; Totally flexible; Easy on your hands; it has no wire wickers; Greaseless; Impervious to rust or kinking; Resistant to permanent smashing; Whiplash-free (does not store energy, cannot whiplash if broken); Lightweight – it reduces the overall weight of Puller;
    • Solid cast components include: FRAME – Ductile iron, Ribbed for added strength. REEL (DRUM) – Welded steel, Double sided teeth for safety. PAWLS (DOGS) – Ductile iron, Double sided for safety, Spring loaded interlocking pawl system. YOKE – Ductile iron, Ribbed for addded strenth. HOOKS – Frame hook & end hook are forged steel, Tackle block hook is a steel investment casting. AMSTEEL BLUE SYNTHETIC ROPE – 5/16″, 12-strand, single braid rope; 100% Dyneema SK-75 fiber with Samthane coating
    • INCLUDES: Main unit with synthetic rope; 3 hooks (Frame hook, end hook, and tackle block hook); Safety latches on all 3 hooks; Safety handle (18″); Two-in-one-unit – Removable tackle block hook allows easy switching from double line to single line capacity. OPTIONAL: Extension handle (18″ -inserts in standard safety handle)
    • DIMENSIONS: 17″ length x 6″ width x 8″ height. WARRANTY All models include a two-year limited warranty. SAFETY: safety handle will bend when the rated capacity of puller is exceeded; Dual-sided reel and pawl system; 5/16″ cable size; Solid one-piece iron components made in USA; Trouble free on one notch at a time let down – up to 4 notches on a light load; Tried and true, tested design since 1934
    • Rope mfg. by Samson Rope; ROPE LENGTH (single line): 35 feet; CAPACITY – Dead Lift Rating (double line): 3 ton (6,000 lbs.); CAPACITY – Pull/Drag Rating (double line) 6 ton (12,000 lbs); ROPE SIZE: 5/16″; WEIGHT LBS: 24.2; MODEL NUMBER: 3-35-A-SLT

BRANDS WE STOCK