“Wyeth Scott More Power Puller 3-35-A-SLT 3-Ton AmSteel-Blue Synthetic Rope Industrial Hand Ratchet Puller/Hoist, 35′” has been added to your cart. View cart
The NX Maximizer EZ Progressive Nitrous Controller is easy to install and easy to tune making it easy to go fast.
The Max EZ was designed to replace the relay in your NX nitrous system so installation time is less than 30 seconds! Simply unplug your existing NX relay and plug the proprietary Max EZ male plug into your NX relay harness (if your nitrous system does not have a standard NX relay harness, use the included NX relay harness to complete the installation).
The Max EZ pulses your nitrous and fuel solenoids to smoothly ramp in your nitrous power resulting in increased traction and less strain on your vehicles drivetrain. The progression ramp automatically starts at 20% and ends at 100% when you push the accelerator pedal to W.O.T. (Wide Open Throttle). Ramp time is adjustable from 0 to 4.5 seconds via a simple turn screw. We recommend selecting the lowest ramp time possible without introducing tire spin. If tire spin is noticed, simply increase the ramp time to slow down the ramp to full power.
The Max EZ is capable of powering nitrous and fuel solenoids with a total amp draw up to 40 amps maximum making it the perfect choice for most plate and single nozzle nitrous systems. Consult your nitrous system manufacturer for your solenoids amp draw.
The Mile Marker SEC12 -12000 lb winch for Jeeps/Trucks/SUVs has an impressive 12,000-pound pull strength allowing you to stand up to the most aggressive off-road environments. Powerful series-wound motors and rugged planetary gear sets are the backbone of this winch. With robust controls, fully sealed 400-amp solenoids and body, and an integrated kill switch, the SEC12 is an industry proven winch at an unmatched value. Built with marine grade remote control connectors and fully-sealed, submersible, water, mud, and snow proof. Each Steel Cable Version comes with a 3/8” x 100’ steel cable, a roller fairlead, the Synthetic Rope version comes with a 3/8” x 92’ synthetic rope, an anodized aluminum hawse fairlead. Both come with stainless steel hardware, a corrosive resistant body, and a handheld remote control with a 12′ cord.
Main Features:
• 4.9 HP Series Wound Motor
• Rugged Planetary Gear Sets
• Clockable Gear Housing
• Fast Line Speeds
• Submersible, 400 Amp Solenoid
• Automatic Load Holding Brake
• Corrosion Resistant Stainless Steel Fasteners
• 100’ Steel Cable Or 92’ Synthetic Rope
• Roller Fairlead (Steel Cable Version) Or Aluminum Hawse Fairlead (Synthetic Rope Version)
• Waterproof
• Handheld Remote Control.
Wyeth Scott More Power Puller 3-35-A-SLT 3-Ton AmSteel-Blue Synthetic Rope Industrial Hand Ratchet Puller/Hoist, 35'
Reviews
There are no reviews yet!