Portable Electric Winch – 1000 lb. Load Capacity
The RHINO PULL 1000™ will give you the power to pull items anywhere you need it, including the garage, workshop, or the farm. This portable winch can even go with you if you are hunting. This ergonomically designed tool features 39’ of synthetic rope, a variable speed hand controller, a wireless control that can work up to 50’, and a corded remote if the wireless remote battery is not maintained.
With an LED display to provide feedback, a brushless motor with digitally controlled modules, a DC 24V 2.5AH lithium battery with power indicator LED lights, AC charger 30V 2000mA, at only 16.8 lbs the RHINO PULL 1000™ is all you need for almost any pulling job.
The RHINO PULL 1000™ Portable Electric Winch was recognized with a SEMA Global Media Award in 2022.
Main Features:
• Wired and Wireless remote
• Lifts or pulls up to 1000 lb
• Brushless motor
• 2.0Ah Lithium battery
• Variable speed
• 39’ synthetic rope
• LED display
The Mile Marker SEC12 -12000 lb winch for Jeeps/Trucks/SUVs has an impressive 12,000-pound pull strength allowing you to stand up to the most aggressive off-road environments. Powerful series-wound motors and rugged planetary gear sets are the backbone of this winch. With robust controls, fully sealed 400-amp solenoids and body, and an integrated kill switch, the SEC12 is an industry proven winch at an unmatched value. Built with marine grade remote control connectors and fully-sealed, submersible, water, mud, and snow proof. Each Steel Cable Version comes with a 3/8” x 100’ steel cable, a roller fairlead, the Synthetic Rope version comes with a 3/8” x 92’ synthetic rope, an anodized aluminum hawse fairlead. Both come with stainless steel hardware, a corrosive resistant body, and a handheld remote control with a 12′ cord.
Main Features:
• 4.9 HP Series Wound Motor
• Rugged Planetary Gear Sets
• Clockable Gear Housing
• Fast Line Speeds
• Submersible, 400 Amp Solenoid
• Automatic Load Holding Brake
• Corrosion Resistant Stainless Steel Fasteners
• 100’ Steel Cable Or 92’ Synthetic Rope
• Roller Fairlead (Steel Cable Version) Or Aluminum Hawse Fairlead (Synthetic Rope Version)
• Waterproof
• Handheld Remote Control.
The Mainline Purge System is designed to purge the air from your nitrous lines to allow immediate activation of your Nitrous system. This System includes a stainless steel purge solenoid, push button for activation, and a vent tube to direct the purged nitrous out of the solenoid. Also included is a -4 AN manifold to run inline with your nitrous feedline. This allows you to purge the nitrous system, even when you do not have a purge port built into your solenoids. The Purge system can also be used to lower the bottle pressure for spot on nitrous performance every time you activate the system.
Purge System includes:
Purge Solenoid.
4 AN adapter manifold.
Push button activation.
1/8 to 1/8 NPT Fitting.
1/8 NPT to Compression Fitting.
7 inches of 3/16″ Stainless Tubing.
If you run a larger -6 AN feedline, the correct Mainline purge system is PN# ML15601.
Nitrous Express ML15600 Nitrous Purge Valve Kit -04AN Manifold Adapter Fitting Push Button Activation Vent Tube Nitrous Purge Valve Kit
Reviews
There are no reviews yet!