“Wyeth Scott More Power Puller 3-35-A-SLT 3-Ton AmSteel-Blue Synthetic Rope Industrial Hand Ratchet Puller/Hoist, 35′” has been added to your cart. View cart
The NX Maximizer EZ Progressive Nitrous Controller is easy to install and easy to tune making it easy to go fast.
The Max EZ was designed to replace the relay in your NX nitrous system so installation time is less than 30 seconds! Simply unplug your existing NX relay and plug the proprietary Max EZ male plug into your NX relay harness (if your nitrous system does not have a standard NX relay harness, use the included NX relay harness to complete the installation).
The Max EZ pulses your nitrous and fuel solenoids to smoothly ramp in your nitrous power resulting in increased traction and less strain on your vehicles drivetrain. The progression ramp automatically starts at 20% and ends at 100% when you push the accelerator pedal to W.O.T. (Wide Open Throttle). Ramp time is adjustable from 0 to 4.5 seconds via a simple turn screw. We recommend selecting the lowest ramp time possible without introducing tire spin. If tire spin is noticed, simply increase the ramp time to slow down the ramp to full power.
The Max EZ is capable of powering nitrous and fuel solenoids with a total amp draw up to 40 amps maximum making it the perfect choice for most plate and single nozzle nitrous systems. Consult your nitrous system manufacturer for your solenoids amp draw.
Stronger, yet lighter than cable; So lightweight it floats; Totally flexible; Easy on your hands; it has no wire wickers; Greaseless; Impervious to rust or kinking; Resistant to permanent smashing; Whiplash-free (does not store energy, cannot whiplash if broken); Lightweight – it reduces the overall weight of Puller;
Solid cast components include: FRAME – Ductile iron, Ribbed for added strength. REEL (DRUM) – Welded steel, Double sided teeth for safety. PAWLS (DOGS) – Ductile iron, Double sided for safety, Spring loaded interlocking pawl system. YOKE – Ductile iron, Ribbed for addded strenth. HOOKS – Frame hook & end hook are forged steel, Tackle block hook is a steel investment casting. AMSTEEL BLUE SYNTHETIC ROPE – 5/16″, 12-strand, single braid rope; 100% Dyneema SK-75 fiber with Samthane coating
INCLUDES: Main unit with synthetic rope; 3 hooks (Frame hook, end hook, and tackle block hook); Safety latches on all 3 hooks; Safety handle (18″); Two-in-one-unit – Removable tackle block hook allows easy switching from double line to single line capacity. OPTIONAL: Extension handle (18″ -inserts in standard safety handle)
DIMENSIONS: 17″ length x 6″ width x 8″ height. WARRANTY All models include a two-year limited warranty. SAFETY: safety handle will bend when the rated capacity of puller is exceeded; Dual-sided reel and pawl system; 5/16″ cable size; Solid one-piece iron components made in USA; Trouble free on one notch at a time let down – up to 4 notches on a light load; Tried and true, tested design since 1934
Rope mfg. by Samson Rope; ROPE LENGTH (single line): 35 feet; CAPACITY – Dead Lift Rating (double line): 3 ton (6,000 lbs.); CAPACITY – Pull/Drag Rating (double line) 6 ton (12,000 lbs); ROPE SIZE: 5/16″; WEIGHT LBS: 24.2; MODEL NUMBER: 3-35-A-SLT
During the installation, please confirm that the power switch is in the “OFF/O” position.
The battery release button must be at the top, align the contact point of the battery against the corresponding contact point on the battery slot, slide the battery in, and gently press until the battery is locked in place.
When removing the battery from Rhino Pull™ portable winch, confirm the power switch is in the “OFF/O” position.
Press down the battery release button and remove the battery.
At only 18.5 pounds, the Mile Marker PE2500 winch for ATVs boasts top-of-the-line recovery speeds and an impressive 2500 pounds of pulling capacity. Fully-sealed, submersible, water, mud, and snow proof, the PE2500 includes a 3/16” x 42’ Steel Cable, a roller fairlead, a hook, corrosive-resistant, and a handheld remote control and a handle bar mounted remote control for versatility and convenience. With the all-metal, 2-stage planetary gear train, 200-amp solenoid, high-output, permanent magnet motor and marine grade remote control connectors, the PE2500 provides the durability and reliability you can depend on in the most extreme situations.
Main Features:
• 2.4 HP Permanent Magnet Motor
• All Metal Planetary Gearing
• Submersible, 200 Amp Solenoid
• Automatic Load Holding Brake
• Center Focused Drum
• Fast Line Speeds
• 42′ of Steel Cable or 50′ Synthetic Rope
• Roller Fairlead or Aluminum Hawse
• Waterproof
• Handheld and Handlebar Controls
SnapPad EQ Grand Lux 6-Pack1 × $324.95 
Camco 55572 18" 50 AMP Locking Male/50 AMP Locking 90 Degree Female PowerGrip Dogbone Electrical Adapter
Trailer Valet TVDA Drill Attachment, Black, Pack of 1
Wyeth Scott More Power Puller 3-35-A-SLT 3-Ton AmSteel-Blue Synthetic Rope Industrial Hand Ratchet Puller/Hoist, 35'
Reviews
There are no reviews yet!