The Mile Marker ATV/UTV Recovery Kit includes everything that you need to push your trail blazing ATV or UTV to the limits: Two 5/8″ powder-coated shackles, two 1″ X 8′ recovery straps, a snatch block, and a pair of recovery gloves are all conveniently packaged in a durable carrying case that can be strapped and mounted virtually anywhere on your rig.
ATV/UTV ACCESSORY KIT INCLUDES:
• Durable Carrying Case
• 8K Snatch Block
• Two 5/8″ Powder Coated Shackles
• Two 1″x 8′ Recovery Strap
• 1 Pair of Gloves
If you are a serious nitrous junkie on a tight budget we have what you have been waiting for! NX introduces MainLine Nitrous Systems. MainLine Systems benefit from the years of research and development that made Nitrous Express the leader in the nitrous world, but at a price even the most budget-restricted racer can afford. Just the basics, no frills, just rock solid performance at rock bottom prices.
Includes:
10lb Nitrous Bottle with Standard Brass Valve
Jetting for 50, 100, 150HP
Stainless Steel Bottle Brackets
NX Piranha Nozzle
Stainless braided nitrous and fuel lines
Mainline .078 orifice nitrous solenoid
Mainline .112 orifice fuel solenoid
4AN stainless steel braided feedline
If you have an aftermarket engine management system that is capable of adding nitrous enrichment fuel and want this system DRY (no fuel components), please call us at (940) 767-7694.
The Mile Marker SEC12 -12000 lb winch for Jeeps/Trucks/SUVs has an impressive 12,000-pound pull strength allowing you to stand up to the most aggressive off-road environments. Powerful series-wound motors and rugged planetary gear sets are the backbone of this winch. With robust controls, fully sealed 400-amp solenoids and body, and an integrated kill switch, the SEC12 is an industry proven winch at an unmatched value. Built with marine grade remote control connectors and fully-sealed, submersible, water, mud, and snow proof. Each Steel Cable Version comes with a 3/8” x 100’ steel cable, a roller fairlead, the Synthetic Rope version comes with a 3/8” x 92’ synthetic rope, an anodized aluminum hawse fairlead. Both come with stainless steel hardware, a corrosive resistant body, and a handheld remote control with a 12′ cord.
Main Features:
• 4.9 HP Series Wound Motor
• Rugged Planetary Gear Sets
• Clockable Gear Housing
• Fast Line Speeds
• Submersible, 400 Amp Solenoid
• Automatic Load Holding Brake
• Corrosion Resistant Stainless Steel Fasteners
• 100’ Steel Cable Or 92’ Synthetic Rope
• Roller Fairlead (Steel Cable Version) Or Aluminum Hawse Fairlead (Synthetic Rope Version)
• Waterproof
• Handheld Remote Control.
The Mainline Purge System is designed to purge the air from your nitrous lines to allow immediate activation of your Nitrous system. This System includes a stainless steel purge solenoid, push button for activation, and a vent tube to direct the purged nitrous out of the solenoid. Also included is a -4 AN manifold to run inline with your nitrous feedline. This allows you to purge the nitrous system, even when you do not have a purge port built into your solenoids. The Purge system can also be used to lower the bottle pressure for spot on nitrous performance every time you activate the system.
Purge System includes:
Purge Solenoid.
4 AN adapter manifold.
Push button activation.
1/8 to 1/8 NPT Fitting.
1/8 NPT to Compression Fitting.
7 inches of 3/16″ Stainless Tubing.
If you run a larger -6 AN feedline, the correct Mainline purge system is PN# ML15601.
Mainline Carb. System With 10Lb Bottle1 × $524.31 
Photon Holster - S&W M&P Shield/M2.0/Plus 9mm/.40 cal 3.1" - With Light - PHO-0404-L1-D
Reviews
There are no reviews yet!