Stronger, yet lighter than cable; So lightweight it floats; Totally flexible; Easy on your hands; it has no wire wickers; Greaseless; Impervious to rust or kinking; Resistant to permanent smashing; Whiplash-free (does not store energy, cannot whiplash if broken); Lightweight – it reduces the overall weight of Puller
Solid cast components include: FRAME – Ductile iron, Ribbed for added strength. REEL (DRUM) – Welded steel, Double sided teeth for safety. PAWLS (DOGS) – Ductile iron, Double sided for safety, Spring loaded interlocking pawl system. YOKE – Ductile iron, Ribbed for addded strenth. HOOKS – Frame hook & end hook are forged steel, Tackle block hook is a steel investment casting. AMSTEEL BLUE SYNTHETIC ROPE – 5/16″, 12-strand, single braid rope; 100% Dyneema SK-75 fiber with Samthane coating
INCLUDES: Main unit with synthetic rope; 3 hooks (Frame hook, end hook, and tackle block hook); Safety Latches on all 3 hooks; Safety handle (18″); Two-in-one-unit – Removable tackle block hook allows easy switching from double line to single line capacity. OPTIONAL: Extension handle (18″ -inserts in standard safety handle)
DIMENSIONS: 17″ length x 6″ width x 8″ height. WARRANTY All models include a two-year limited warranty. SAFETY: safety handle will bend when the rated capacity of puller is exceeded; Dual-sided reel and pawl system; 5/16″ cable size; Solid one-piece iron components made in USA; Trouble free on one notch at a time let down – up to 4 notches on a light load; Tried and true, tested design since 1934
Rope mfg. by Samson Rop; ROPE LENGTH (single line): 20 feet; CAPACITY Dead Lift Rating (double line): 2 ton (4,000 lbs.); CAPACITY Pull/Drag Rating (double line) 4 ton (8,000 lbs); ROPE SIZE: 5/16″; WEIGHT LBS: 22.8; MODEL NUMBER: 2-20-A-SLT
The NX Maximizer EZ Progressive Nitrous Controller is easy to install and easy to tune making it easy to go fast.
The Max EZ was designed to replace the relay in your NX nitrous system so installation time is less than 30 seconds! Simply unplug your existing NX relay and plug the proprietary Max EZ male plug into your NX relay harness (if your nitrous system does not have a standard NX relay harness, use the included NX relay harness to complete the installation).
The Max EZ pulses your nitrous and fuel solenoids to smoothly ramp in your nitrous power resulting in increased traction and less strain on your vehicles drivetrain. The progression ramp automatically starts at 20% and ends at 100% when you push the accelerator pedal to W.O.T. (Wide Open Throttle). Ramp time is adjustable from 0 to 4.5 seconds via a simple turn screw. We recommend selecting the lowest ramp time possible without introducing tire spin. If tire spin is noticed, simply increase the ramp time to slow down the ramp to full power.
The Max EZ is capable of powering nitrous and fuel solenoids with a total amp draw up to 40 amps maximum making it the perfect choice for most plate and single nozzle nitrous systems. Consult your nitrous system manufacturer for your solenoids amp draw.
Proton nitrous systems combine performance, durability and value in a compact and easy to mount, made in the USA, nitrous / fuel module. Proton systems now contain a new and improved nitrous / fuel module that is capable of producing up to 250 horsepower to the wheels! The new nitrous / fuel module is extremely durable and is compatible with progressive nitrous controllers. This Proton Plus system includes jetting for 35HP, 50HP, 75HP, 100HP, 125HP and 150HP but can flow up to 250HP with the optional SHO jet kit. This system includes a 10lb nitrous bottle with a high flow billet aluminum Lightning bottle valve, stainless bottle brackets, a single Shark nozzle, nozzle adapter, stainless braided nozzle lines, 15 foot braided stainless feed line, stainless fuel line, master arming switch, wide open throttle switch, 40 amp relay, relay harness as well as every nut, bolt and electrical connector needed to complete the installation. Fits all electronic fuel injected vehicles with a single throttle body.
Model Number: 20421-10
Item Package Dimension: 28.0″ L x 11.0″ W x 10.0″ H
At only 18.5 pounds, the Mile Marker PE2500 winch for ATVs boasts top-of-the-line recovery speeds and an impressive 2500 pounds of pulling capacity. Fully-sealed, submersible, water, mud, and snow proof, the PE2500 includes a 3/16” x 42’ Steel Cable, a roller fairlead, a hook, corrosive-resistant, and a handheld remote control and a handle bar mounted remote control for versatility and convenience. With the all-metal, 2-stage planetary gear train, 200-amp solenoid, high-output, permanent magnet motor and marine grade remote control connectors, the PE2500 provides the durability and reliability you can depend on in the most extreme situations.
Main Features:
• 2.4 HP Permanent Magnet Motor
• All Metal Planetary Gearing
• Submersible, 200 Amp Solenoid
• Automatic Load Holding Brake
• Center Focused Drum
• Fast Line Speeds
• 42′ of Steel Cable or 50′ Synthetic Rope
• Roller Fairlead or Aluminum Hawse
• Waterproof
• Handheld and Handlebar Controls
Mile Marker 549 Fits Ford F-550 Super Duty1 × $185.00 
Reviews
There are no reviews yet!