The Mainline Purge System is designed to purge the air from your nitrous lines to allow immediate activation of your Nitrous system. This System includes a stainless steel purge solenoid, push button for activation, and a vent tube to direct the purged nitrous out of the solenoid. Also included is a -4 AN manifold to run inline with your nitrous feedline. This allows you to purge the nitrous system, even when you do not have a purge port built into your solenoids. The Purge system can also be used to lower the bottle pressure for spot on nitrous performance every time you activate the system.
Purge System includes:
Purge Solenoid.
4 AN adapter manifold.
Push button activation.
1/8 to 1/8 NPT Fitting.
1/8 NPT to Compression Fitting.
7 inches of 3/16″ Stainless Tubing.
If you run a larger -6 AN feedline, the correct Mainline purge system is PN# ML15601.
During the installation, please confirm that the power switch is in the “OFF/O” position.
The battery release button must be at the top, align the contact point of the battery against the corresponding contact point on the battery slot, slide the battery in, and gently press until the battery is locked in place.
When removing the battery from Rhino Pull™ portable winch, confirm the power switch is in the “OFF/O” position.
Press down the battery release button and remove the battery.
Stronger, yet lighter than cable; So lightweight it floats; Totally flexible; Easy on your hands; it has no wire wickers; Greaseless; Impervious to rust or kinking; Resistant to permanent smashing; Whiplash-free (does not store energy, cannot whiplash if broken); Lightweight – it reduces the overall weight of Puller;
Solid cast components include: FRAME – Ductile iron, Ribbed for added strength. REEL (DRUM) – Welded steel, Double sided teeth for safety. PAWLS (DOGS) – Ductile iron, Double sided for safety, Spring loaded interlocking pawl system. YOKE – Ductile iron, Ribbed for addded strenth. HOOKS – Frame hook & end hook are forged steel, Tackle block hook is a steel investment casting. AMSTEEL BLUE SYNTHETIC ROPE – 5/16″, 12-strand, single braid rope; 100% Dyneema SK-75 fiber with Samthane coating
INCLUDES: Main unit with synthetic rope; 3 hooks (Frame hook, end hook, and tackle block hook); Safety latches on all 3 hooks; Safety handle (18″); Two-in-one-unit – Removable tackle block hook allows easy switching from double line to single line capacity. OPTIONAL: Extension handle (18″ -inserts in standard safety handle)
DIMENSIONS: 17″ length x 6″ width x 8″ height. WARRANTY All models include a two-year limited warranty. SAFETY: safety handle will bend when the rated capacity of puller is exceeded; Dual-sided reel and pawl system; 5/16″ cable size; Solid one-piece iron components made in USA; Trouble free on one notch at a time let down – up to 4 notches on a light load; Tried and true, tested design since 1934
Rope mfg. by Samson Rope; ROPE LENGTH (single line): 35 feet; CAPACITY – Dead Lift Rating (double line): 3 ton (6,000 lbs.); CAPACITY – Pull/Drag Rating (double line) 6 ton (12,000 lbs); ROPE SIZE: 5/16″; WEIGHT LBS: 24.2; MODEL NUMBER: 3-35-A-SLT
Nitrous Pressure Gauge Only (0-1500 PSI)1 × $40.94 
Nitrous Express Nitrous Oxide System, Proton Plus, Wet, Single Stage, 35-150 HP, 10 lb Bottle, White, Universal EFI, Kit
Reviews
There are no reviews yet!