Hot Water Bottle Baths are a quick, reliable and convenient way to maintain consistent pressure in your 10, 12, or 15lb nitrous bottles.
The Nitrous Express Hot Water Bottle Bath is the best engineered and the highest quality water based bottle heater available. The high strength polymer construction allowed us to build in features and benefits that would not be possible with welded metal tanks. The polymer tank is stronger and more durable than a comparable metal tank plus the composite tank will never rust or oxidize. The polymer tank insulates better than metal tanks so the water heats quicker and the heater element does not have to turn on as often. The tank design also allowed us to house the electronics behind the front panel so you don’t have an ugly square box hanging off the front of the tank. We molded a separator shelf inside the tank which keeps the bottles from sliding into the heating element during transport. Carrying slots are flush molded into the side of the tank to minimize the space the tank occupies. The digital display is mounted on the top of the tank so you do not have to bend over to see the temperature setting. The digital control circuit is easy to set and automatically maintains water temperature within 1 degree of accuracy.
The NX Purge System is designed to purge the air from your nitrous lines to allow immediate activation of your Nitrous system. This System includes a Lightning solenoid, push button for activation, and a vent tube to direct the purged nitrous out of the solenoid. Also included is a 4AN manifold to run inline with your nitrous feedline. This allows you to purge the nitrous system, even when you do not have a purge port built into your solenoids. The Purge system can also be used to lower the bottle pressure for spot on nitrous performance every time you activate the system.
NX nitrous bottles feature a tough and attractive powder-coated finish. Includes the billet aluminum Lightning 500 bottle valve.
The NX Lightning 500 bottle valve flows great, weighs less, and looks amazing. The new and improved Lightning 500 bottle valve features a huge 5/8 siphon tube, a 500 thousandths high lift stem assembly, and a 45-degree outlet for the ultimate in flow and horsepower production. The Lightning 500 valve includes dual gauge ports and weighs 1/2 pound less than our old style chrome-plated brass valve. The Lightning 500 comes standard in many NX nitrous systems and is also available separately as an upgrade for your existing bottle.
The lightning 500 bottle valve includes a 4AN bottle nipple, other bottle nipple sizes may be purchased separately.
Nitrous Express introduced the nitrous industrys first servo powered bottle opener in 1999. It has been copied but never duplicated. NX now introduces the Next Generation in nitrous bottle openers. This unique new design will operate on most brand nitrous bottles and is lighter and sleeker than any available opener. Sure to be copied, but NXs Made in the USA quality will never be matched!
Designed to work with NX Lightning Valves, but may work on other valves as well.
New design that will operate any brand nitrous bottle
Nitrous Express has spent countless hours on the flow bench, eliminating these turbulence points in its systems to minimize the boiling of the nitrous charge. NX has designed its own bottle valve, which differs in many ways from the standard or even custom valves offered by the other companies. The flow path of the NX “Lightning” bottle valve has only one turn, a 45-degree angle to the discharge point. This eliminates the harsh 90-degree turn present in most bottle valves. One company that boasts of its “Super High Flow Valve” has designed one 45-degree turn and one 127-degree turn inside the body of the valve. This severely restricts the flow and causes a turbulence point that sends a diluted flow of nitrous downstream to the nitrous solenoid. Finally, the style of bottle nipple used by NX allows the nitrous to transition from the valve to the supply hose with no internal steps or restrictions. These things may seem small or insignificant to the layperson, but on the dyno, NX systems make more horsepower per pound of nitrous than anyone.
Nitrous Express Lightning 500 bottle valves feature a .500″ orifice and a direct flow path that eliminates those power-robbing gaseous bubbles. The result is more horsepower! The Lightning 500 will outflow any competitor’s valve on the market today and is recommended for all nitrous systems up to 2000 nitrous horsepower. The 500 has a .625″ siphon tube, only one 45-degree turn in the nitrous flow path, and fittings that will allow the use of up to a 10AN supply line with no restrictions. The 500 is engineered to eliminate all obstructions, sharp edges, or tight turns that will disrupt the smooth laminar flow of nitrous. This design minimizes boiling and gaseous nitrous in the flow path to the solenoid resulting in a nitrous system that produces more clean horsepower and is easier to tune on any car! The Lightning 500 is CNC machined from billet aluminum and is approximately ½ pound lighter than a comparable brass valve, it has dual gauge ports and interchangeable nipples that will allow the use of 4AN, 6AN, 8AN, or 10AN supply lines.
Valves include a 4AN nipple. Other bottle nipple sizes need to be purchased separately.
The Maximizer 6 features many safety features that help you push your tune-up further while protecting your engine from damage.
The Maximizer 6 progressive nitrous controller operates up to four separate stages of nitrous based on either time, RPM, MPH, throttle percentage or boost pressure. Whether your engine is naturally aspirated or forced induction, gasoline or diesel, the Maximizer 6 is the first choice.
Safety Features
The Max 6 monitors throttle percentage, engine rpms, nitrous PSI, boost or pan vacuum as well as 3 other user defined sensors to ensure that your engine is in the correct state to accept nitrous. If the Max 6 detects any condition that is outside the safe range, the Max 6 will shut down or pull back nitrous flow to protect your engine from any damage.
Nitrous Express 16008 Maximizer 5 Progressive Controller; Incl. Internal Drivers For Stage One And Stage Two; Operates Up To 4 Separate stages Of Nitrous;
If you are a serious nitrous junkie on a tight budget we have what you have been waiting for! NX introduces MainLine Nitrous Systems. MainLine Systems benefit from the years of research and development that made Nitrous Express the leader in the nitrous world, but at a price even the most budget-restricted racer can afford. Just the basics, no frills, just rock solid performance at rock bottom prices.
Includes:
10lb Nitrous Bottle with Standard Brass Valve
Jetting for 50, 100, 150HP
Stainless Steel Bottle Brackets
NX Piranha Nozzle
Stainless braided nitrous and fuel lines
Mainline .078 orifice nitrous solenoid
Mainline .112 orifice fuel solenoid
4AN stainless steel braided feedline
If you have an aftermarket engine management system that is capable of adding nitrous enrichment fuel and want this system DRY (no fuel components), please call us at (940) 767-7694.
The NX Maximizer EZ Progressive Nitrous Controller is easy to install and easy to tune making it easy to go fast.
The Max EZ was designed to replace the relay in your NX nitrous system so installation time is less than 30 seconds! Simply unplug your existing NX relay and plug the proprietary Max EZ male plug into your NX relay harness (if your nitrous system does not have a standard NX relay harness, use the included NX relay harness to complete the installation).
The Max EZ pulses your nitrous and fuel solenoids to smoothly ramp in your nitrous power resulting in increased traction and less strain on your vehicles drivetrain. The progression ramp automatically starts at 20% and ends at 100% when you push the accelerator pedal to W.O.T. (Wide Open Throttle). Ramp time is adjustable from 0 to 4.5 seconds via a simple turn screw. We recommend selecting the lowest ramp time possible without introducing tire spin. If tire spin is noticed, simply increase the ramp time to slow down the ramp to full power.
The Max EZ is capable of powering nitrous and fuel solenoids with a total amp draw up to 40 amps maximum making it the perfect choice for most plate and single nozzle nitrous systems. Consult your nitrous system manufacturer for your solenoids amp draw.
Proton Series nitrous systems combine performance, durability and value in a compact and easy to mount module. Proton systems contain high quality, made in the USA, solenoids that are capable of producing 250 horsepower to the wheels. The black anodized aluminum housing not only looks great, it pulls heat away from the solenoids for extreme durability.
This system fits all electronic fuel injected vehicles with a single throttle body.
The Mainline Purge System is designed to purge the air from your nitrous lines to allow immediate activation of your Nitrous system. This System includes a stainless steel purge solenoid, push button for activation, and a vent tube to direct the purged nitrous out of the solenoid. Also included is a -4 AN manifold to run inline with your nitrous feedline. This allows you to purge the nitrous system, even when you do not have a purge port built into your solenoids. The Purge system can also be used to lower the bottle pressure for spot on nitrous performance every time you activate the system.
Purge System includes:
Purge Solenoid.
4 AN adapter manifold.
Push button activation.
1/8 to 1/8 NPT Fitting.
1/8 NPT to Compression Fitting.
7 inches of 3/16″ Stainless Tubing.
If you run a larger -6 AN feedline, the correct Mainline purge system is PN# ML15601.
If you are a serious nitrous junkie on a tight budget we have what you have been waiting for! NX introduces MainLine Nitrous Systems. MainLine Systems benefit from the years of research and development that made Nitrous Express the leader in the nitrous world, but at a price even the most budget-restricted racer can afford. Just the basics, no frills, just rock solid performance at rock bottom prices. The ML1000 will outperform any other 250HP carbureted kit on the market, guaranteed to make 250HP. Most of it s competitors promise 250HP but only produce 160WHP!
Proton nitrous systems combine performance, durability and value in a compact and easy to mount, made in the USA, nitrous / fuel module. Proton systems now contain a new and improved nitrous / fuel module that is capable of producing up to 250 horsepower to the wheels! The new nitrous / fuel module is extremely durable and is compatible with progressive nitrous controllers. This Proton Plus system includes jetting for 35HP, 50HP, 75HP, 100HP, 125HP and 150HP but can flow up to 250HP with the optional SHO jet kit. This system includes a 10lb nitrous bottle with a high flow billet aluminum Lightning bottle valve, stainless bottle brackets, a single Shark nozzle, nozzle adapter, stainless braided nozzle lines, 15 foot braided stainless feed line, stainless fuel line, master arming switch, wide open throttle switch, 40 amp relay, relay harness as well as every nut, bolt and electrical connector needed to complete the installation. Fits all electronic fuel injected vehicles with a single throttle body.
Model Number: 20421-10
Item Package Dimension: 28.0″ L x 11.0″ W x 10.0″ H
