The Mile Marker ATV/UTV Recovery Kit includes everything that you need to push your trail blazing ATV or UTV to the limits: Two 5/8″ powder-coated shackles, two 1″ X 8′ recovery straps, a snatch block, and a pair of recovery gloves are all conveniently packaged in a durable carrying case that can be strapped and mounted virtually anywhere on your rig.
ATV/UTV ACCESSORY KIT INCLUDES:
• Durable Carrying Case
• 8K Snatch Block
• Two 5/8″ Powder Coated Shackles
• Two 1″x 8′ Recovery Strap
• 1 Pair of Gloves
Stronger, yet lighter than cable; So lightweight it floats; Totally flexible; Easy on your hands; it has no wire wickers; Greaseless; Impervious to rust or kinking; Resistant to permanent smashing; Whiplash-free (does not store energy, cannot whiplash if broken); Lightweight – it reduces the overall weight of Puller;
Solid cast components include: FRAME – Ductile iron, Ribbed for added strength. REEL (DRUM) – Welded steel, Double sided teeth for safety. PAWLS (DOGS) – Ductile iron, Double sided for safety, Spring loaded interlocking pawl system. YOKE – Ductile iron, Ribbed for addded strenth. HOOKS – Frame hook & end hook are forged steel, Tackle block hook is a steel investment casting. AMSTEEL BLUE SYNTHETIC ROPE – 5/16″, 12-strand, single braid rope; 100% Dyneema SK-75 fiber with Samthane coating
INCLUDES: Main unit with synthetic rope; 3 hooks (Frame hook, end hook, and tackle block hook); Safety latches on all 3 hooks; Safety handle (18″); Two-in-one-unit – Removable tackle block hook allows easy switching from double line to single line capacity. OPTIONAL: Extension handle (18″ -inserts in standard safety handle)
DIMENSIONS: 17″ length x 6″ width x 8″ height. WARRANTY All models include a two-year limited warranty. SAFETY: safety handle will bend when the rated capacity of puller is exceeded; Dual-sided reel and pawl system; 5/16″ cable size; Solid one-piece iron components made in USA; Trouble free on one notch at a time let down – up to 4 notches on a light load; Tried and true, tested design since 1934
Rope mfg. by Samson Rope; ROPE LENGTH (single line): 35 feet; CAPACITY – Dead Lift Rating (double line): 3 ton (6,000 lbs.); CAPACITY – Pull/Drag Rating (double line) 6 ton (12,000 lbs); ROPE SIZE: 5/16″; WEIGHT LBS: 24.2; MODEL NUMBER: 3-35-A-SLT
The Mile Marker SEC12 -12000 lb winch for Jeeps/Trucks/SUVs has an impressive 12,000-pound pull strength allowing you to stand up to the most aggressive off-road environments. Powerful series-wound motors and rugged planetary gear sets are the backbone of this winch. With robust controls, fully sealed 400-amp solenoids and body, and an integrated kill switch, the SEC12 is an industry proven winch at an unmatched value. Built with marine grade remote control connectors and fully-sealed, submersible, water, mud, and snow proof. Each Steel Cable Version comes with a 3/8” x 100’ steel cable, a roller fairlead, the Synthetic Rope version comes with a 3/8” x 92’ synthetic rope, an anodized aluminum hawse fairlead. Both come with stainless steel hardware, a corrosive resistant body, and a handheld remote control with a 12′ cord.
Main Features:
• 4.9 HP Series Wound Motor
• Rugged Planetary Gear Sets
• Clockable Gear Housing
• Fast Line Speeds
• Submersible, 400 Amp Solenoid
• Automatic Load Holding Brake
• Corrosion Resistant Stainless Steel Fasteners
• 100’ Steel Cable Or 92’ Synthetic Rope
• Roller Fairlead (Steel Cable Version) Or Aluminum Hawse Fairlead (Synthetic Rope Version)
• Waterproof
• Handheld Remote Control.
The Mainline Purge System is designed to purge the air from your nitrous lines to allow immediate activation of your Nitrous system. This System includes a stainless steel purge solenoid, push button for activation, and a vent tube to direct the purged nitrous out of the solenoid. Also included is a -4 AN manifold to run inline with your nitrous feedline. This allows you to purge the nitrous system, even when you do not have a purge port built into your solenoids. The Purge system can also be used to lower the bottle pressure for spot on nitrous performance every time you activate the system.
Purge System includes:
Purge Solenoid.
4 AN adapter manifold.
Push button activation.
1/8 to 1/8 NPT Fitting.
1/8 NPT to Compression Fitting.
7 inches of 3/16″ Stainless Tubing.
If you run a larger -6 AN feedline, the correct Mainline purge system is PN# ML15601.
Reviews
There are no reviews yet!